Table of Contents
Advertisement
PROGRAMMING
SIREN AND ALARMS
Setting
Burglary Alarm Confirmation
Burglary Alarm Confirmation Timer
Severe Weather Siren Warning
Dialer Delay
NOTE: Shall not be used on EN Grade 2
Siren Timeout
Water/Freeze/Temperature Siren
Default
When enabled, a confirmed alarm requires two sequential burglary alarms within the
Disabled
Burglary Alarm Confirmation Timer window.
Grade 2 is enabled.
Timer used for Burglary Alarm Confirmation.
30
Grade 2 is enabled.
When enabled, siren will sound when the panel receives a severe weather alert. When
Enabled
disabled, panel will use severe weather chime
Amount of time (in seconds) before panel will attempt call to central station after an alarm
event is triggered
:30
When SIA Limits enabled: :15 to :45 seconds
When SIA Limits disabled: :0 to :254 seconds
Determine how long before siren stops sounding during an alarm event (3 minutes to 15
minutes).
NOTE: For UL/cUL residential fire/burg applications the minimum bell timeout shall be set to 5 min. For
4 min
UL Commercial Burglary installations, minimum bell time out shall be set to 15 minutes. For EN Grade 2 the minimum
bell timeout shall be 90 sec and maximum bell timeout shall not exceed local regulations.
When enabled, siren will sound when a water or freeze detector is triggered. When
Enabled
disabled, the panel emits a "water" tone
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE
40
Description
NOTE: This setting is greyed out and unavailable unless EN
NOTE: This setting is greyed out and unavailable unless EN
OF
197
Advertisement
Table of Contents
