Table of Contents
Advertisement
TROUBLESHOOTING
POWER DOWN
DO NOT remove all power without following the steps below. In the event of needing to
move the panel from one location to another it is safe to unplug the power supply while
leaving the battery plugged in.
1. From the drop down menu select "Settings".
2. Select "Advanced Settings" then enter your installer code
3. Select "Power Down"
4. Wait for panel LED to turn off
5. Disconnect the power
?
QUESTIONS?
IMPORTANT: Failure to perform these
steps in the proper sequence may result in
data corruption and/or panel failure.
Contact us at
techsupport@qolsys.com
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE
157
OF
197
FIND IT
Swipe down
for access
SETTINGS
ADVANCED SETTINGS
ENTER CODE (1111, 2222)
POWER DOWN
Advertisement
Table of Contents
