Table of Contents
Advertisement
PROGRAMMING
INSTALLER/DEALER SETTINGS
Setting
Ambient Noise Threshold
Noise Detector Duration
Noise Detector Popup
Zigbee Network Type
NOTE: Not evaluated for UK or CE/EN Grade 2
Light Reporting (PowerG)
Temperature Reporting (PowerG)
System Health Check
Default
Set the threshold at which the Panel Ambient Noise Detector determines there is enough
85 dB
noise to generate an alert. Choose from values between 75 and 95 dB.
greyed out and not selectable unless Panel Ambient Noise Detector is Enabled.
Determines the length of time for which the panel must detect noise above the threshold
20 min
level in order to generate a noise notification.
Determines whether the panel indicates locally on the screen that noise event has been
Disabled
detected.
Choose which type of Zigbee network you' d like to use. Options are Home Automation
Home
and Security or Smart Energy.
Automation and
the Panel. When paired to UL Listed Zigbee devices, Zigbee can be used for UL/ULC Listed Residential Fire and
Security
Burglary applications.
When Enabled, PowerG devices that support light sensor capabilities report light status to
Disabled
the Panel. Data is stored for future use.
When Enabled, PowerG devices that support temperature measurement, report
Disabled
temperature information to the Panel. Data is stored for future use.
Determines whether the System Health Check feature shows up on the Manage My
Enabled
System primary user interface (enabled) or not (disabled).
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE
Description
NOTE: This setting only appears when a Zigbee daughter card is installed in
36
OF
197
NOTE: This setting is
Advertisement
Table of Contents
