Table of Contents
Advertisement
PROGRAMMING
INSTALLER/DEALER SETTINGS
Setting
WI-FI Warning Messages
Partitions
Other Automation
Zwave Frequency Region
PowerG Camera Image Capture
Count
PowerG Camera Alarm Image
Upload Limit
Power Down Event Communication
Default
When enabled the panel display will automatically revert to the Manage My System page
Enabled
as the default page if Wi-Fi is not connected to encourage end users to stay connected.
Disabled
Create up to 4 partitions by enabling this feature.
When Enabled, the Panel can support Zigbee Automation devices as well as Deako
Lighting integrations. These devices are added through the "Other Automation" icon that
Disabled
will appear under the "Devices" icon.
NOTE: Zigbee integration requires that a Zigbee daughter card be installed in the panel. Not evaluated for UKCA or CE/
EN Grade 2.
Sets automatically based on install region and Z-Wave hardware installed in the panel or
Varies by Region
manually choose between United States, European Union, Australia/New Zealand, Hong
Kong, Malaysia, India, Israel, Russia, China, Japan or Korea.
Determines the number of Images to be uploaded by any PowerG PIR CAM when
1
triggered during an Alarm. Choose between 1 or 10.
Determines if PowerG PIR CAMs upload only images from the first motion event during
Enabled
an arming period (Enabled) or if they will upload images from the 1st, 2nd & 3rd motion
events for that arming period (Disabled).
Determines if the Panel sends a unique event code (enabled) or not (disabled) to ADC
Disabled
and the CS if the Master Code is used to access the Power Down icon under Advanced
Settings.
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE
Description
32
OF
197
Advertisement
Table of Contents
