Table of Contents
Advertisement
PROGRAMMING
INSTALLER/DEALER SETTINGS
Setting
EU Event Swinger Shutdown Count
Favorite Languages
LED Indicator
Power Off Indicator
6 Digit User Code
Commercial Sensor and Device
Names
Wellness Support
Default
Determines the number of times a particular event will record to "EU Events" log before
3
shutdown. The count (3-10) will reset after and arm or disarm event.
greyed out and not selectable unless EN Grade 2 is Enabled.
Set the Panel's language toggle to your favorite 2 languages. Choose from English
(United States), Français (Canada), Español (Estados Unidos), Italiano (Italia), Nederlands
(Nederland), Norsk bokmål (Norge), Svenska (Sverige), Íslenska (Ísland), Deutsch
English/Español
(Deutschland), Magyar, (Magyarország), Dansk (Danmark), Românā (România), Portuguesa
(Portugal), Polskie (Polska), Suomalainen (Suomi), Français (France), Español (España),
Hebrew, Türk (Türkiye).
Manually Enable/Disable the LED Status Light on the panel.
Enabled
NOTE: This setting will automatically be set to Disabled when EN Grade 2 is Enabled.
Disabled
When Enabled, LED Status Light on the Panel will flash orange if there is a power failure.
This is a global setting for all codes used on the panel and changes the input from 4 digits
Disabled
to 6 digits. When enabled, a "00" will be appended to all existing 4 digit codes
Enabling this features changes the sensor name vocabulary from residential naming to
Disabled
commercial naming.
When Enabled, Auxiliary Pendants learned into Group 6 behave like a traditional PERS
pendant. The system generates a signal to Alarm.com but does not generate a loud local
Disabled
alarm that needs to be disarmed between button presses.
Partitions are enabled.
Description
NOTE: This setting is
NOTE: This feature cannot be enabled if
Advertisement
Table of Contents
