Unpacking And Inspecting; Checking The Accessories; Installing The Host Adapter - ADIC FastStor LTO User Manual

For the most part, installation is simply a matter of checking all necessary SCSI connections, installing the application software
(backup or otherwise) on the host computer, and applying power. The FastStor LTO defaults set at the factory should be sufficient
for most applications.

Unpacking and Inspecting

If the operating environment differs from the storage environment by 15° C
(30° F) or more, let the unit acclimate to the surrounding environment for at
least 12 hours.
5
Unpack all items from the carton. Save the packing materials in case you need to move or ship the system in the future.
You must ship the FastStor LTO in the original or equivalent packing materials
or your warranty may be invalidated.

Checking the Accessories

Check to make certain that the following items are included with your FastStor LTO:
• Power cord
• One SCSI cable with 68-pin HD/ 68-pin HD connectors
• One active 68-pin SCSI bus terminator
• This manual
• A Warranty Registration card with free LTO Cleaning Tape coupon
• Two keys for the front door

None of the items should show signs of damage.

Installing the Host Adapter

At this point if your host computer system does not have native SCSI capability and the host adapter you are using is not installed,
please install it. Refer to the manual that came with your host adapter for specific directions.
When the host adapter card is installed return to this point in the manual.
10 Hardware Installation
Caution
Caution