Getting Started; Unpacking And Inspecting; Checking The Accessories; Unpacking The Autoloader - ADIC FastStor 2 User Manual

This section describes how to install and set up the FastStor 2 autoloader.

Unpacking and Inspecting

Before you begin, clear a desk or table so that you can unpack the autoloader.
If the room in which you are working differs from the temperature in
CAUTION:
which the autoloader was shipped or stored by 30° F (15° C) or more,
let the autoloader acclimate to the surrounding environment for at
least 12 hours before opening the shipping carton.

Checking the Accessories

The autoloader equipment box includes the following items:
• 1 US power cord
• 1 European power cord
• 1 SCSI Ultra 2 LVD Multimode Terminator
• 1 Documentation CD
• 1 Quick Start Guide (paper copy)

Unpacking the Autoloader

Follow the directions below to unpack the autoloader.
To unpack and inspect the autoloader for shipping damage
1. Clear a table or desk so that you have room to unpack the autoloader.
Unpacking and Inspecting

Getting Started

21