Clr Errlog; Drv Dump - ADIC FastStor LTO User Manual

CLR ERRLOG

5
After entering the DIAG MENU, press and hold the MODE button until DRV MAINT appears on the LCD.
5
Press the SELECT button to access the DRV MAINT sub-functions. DRV DIAGS will be displayed on the LCD.
5
Press the NEXT button repeatedly until the following appears on the LCD:
5
Press the SELECT button to clear the drive error log.
5
When the drive error log is cleared, and if no errors were encountered, the following will appear on the LCD:
5
Press SELECT to return to CLR ERRLOG.

DRV DUMP

5
After entering the DIAG MENU, press and hold the MODE button until DRV MAINT appears on the LCD.
5
Press the SELECT button to access the DRV MAINT sub-functions. DRV DIAGS will be displayed on the LCD.
5
Press the NEXT button repeatedly until the following appears on the LCD:
5
Press the SELECT button to have the drive perform a dump of data collected by the drive (save a microcode trace).
48 Troubleshooting and Diagnostics