Table of Contents
Advertisement
Manually Cleaning the Drive Head
N
N
Cleaning cartridges are considerably more abrasive to the drive's recording
head than standard data cartridges. Usage should be kept within the
recommended limits.
5
Open the front door of the FastStor LTO.
5
Insert the cleaning cartridge into an empty storage slot.
5
Use Mode 1A – LOAd dRV to load the cleaning tape into the drive.
The cleaning cycle will be performed. When cleaning is completed, perform the following instructions:
5
Use Mode 1B – EJECT dRV to unload the cleaning tape from the drive and place it back in the storage slot.
5
Remove the cleaning cartridge and check a usage box on the label.
5
To resume normal operation, close the door and lock it.
Cleaning the Enclosure
The outside of the enclosure can be cleaned with a damp towel. If you use a liquid all-purpose cleaner, apply it to the towel. Do not
directly spray the enclosure.
28
Operation and Maintenance
Notes
Caution
Advertisement
Table of Contents
