Mode 4 - Eject Pckr; Mode 6 - Set Scsi Id - ADIC FastStor LTO User Manual

EJECT PCKR
Mode 4 –
Mode 4 causes the FastStor LTO to eject a tape left in the Media Picker to any empty destination slot.
5
To access Mode 4, press the MODE button until the LCD appears as shown:
5
Press the SELECT button to select Mode 4. The LCD will appear as shown while the drive ejects the tape (N is the slot the
FastStor LTO will attempt to move the tape to.):
5
Use the NEXT or PREVIOUS button to scroll through the destination slot choices. Press SELECT when the slot you wish to
place the tape in is displayed. When your FastStor LTO has completed the command, it will return to LdR REAdY.
SET SCSI ID
Mode 6 –
Use Mode 6 to set the SCSI ID of the FastStor LTO robotics and/or the drive.
24 Operation and Maintenance
Note




         




         
Note
Note