Finding A Location; Unpacking Your Library - ADIC Scalar 100 User Manual
Quantum scalar 100: user guide
Hide thumbs
Also See for Scalar 100:
- User manual (346 pages) ,
- Quick start manual (2 pages) ,
- Release note (2 pages)
Table of Contents
Advertisement
Refer to
Configuring your Library
7
Prepare the host system.
Refer to
Cabling Drive Control Path Libraries
8
Verify communication between the library and the host.
Refer to
Verifying Communication with the Host
Finding a Location
When positioning the library, consider the following:
•
The location must provide adequate front and rear ventilation (at least two inches, the space
provided by the cabling will suffice).
•
Situate the product away from heat sources such as radiators, heat registers, furnaces, or other
heat-producing appliances.
•
Ensure a power source (only of the type directed in the operating instructions or as marked on the
product label) is available.
•
Route the AC line cord so that it is not likely to be walked on or pinched by items placed upon or
against it, paying particular attention to the cord at the wall receptacle, and the point where the cord
exits from the product.
•
Ensure that objects will not fall and liquids are not spilled into the product's enclosure through
openings.
•
Do not position in an area that will expose the unit to moisture or high temperatures or extreme low
temperatures.
•
Keep the unit away from direct strong magnetic fields, excessive dust, and electronic/electrical
equipment that generate electrical noise.
•
Position the unit on a firm, level surface free from vibration.
Unpacking your Library
If you need to return your library, you must ship it in the original or
CAUTION
equivalent packing materials or your warranty may be invalidated.
Do not move the picker assembly along the rotary axis by hand as it
CAUTION
will be damaged. The picker assembly can be rotated by turning the
gear on the rotary motor by hand.
1
Unpack all items from the carton.
Save the packing materials in case you need to move or ship the system in the future.
2
Inspect the items that came with your library and ensure none are damaged.
3
Complete either the written registration card or register the product on the ADIC website at
www.adic.com.
The Scalar 100 serial number is located on the product label on the back of the library and on the inside
of the front door.
14
on page 67.
on page 16.
on page 22.
Setting up your Scalar 100
Advertisement
Table of Contents
