Power Up Checks; Setting The Scsi Ids - ADIC FastStor LTO User Manual

While the FastStor LTO initializes, the LCD will appear as shown below. The Activity LED will blink slowly, and the Activity Bars
will appear on the LCD.
At the completion of FastStor LTO initialization, the drive will initialize and the LCD will appear as shown below. The Activity
LED will blink fast, and the Activity Bars will appear on the LCD.
At the conclusion of drive initialization, the LCD will appear as shown below:

Power Up Checks

When you apply power to your FastStor LTO it will perform the following actions:
N
Verify drive configuration and status.
N
Build a valid cartridge inventory log.
N
Calibrate the Media Picker.
When the FastStor LTO has completed the Power Up Checks, the LCD will display LdR REAdY.

Setting the SCSI IDs

N
N















Notes
Operation and Maintenance 15