Account Page Definitions; Account/General Settings; Account/Sip Settings - Grandstream Networks GXV3350 Administration Manual

Ip video phone
Hide thumbs Also See for GXV3350:
Table of Contents

Advertisement

Boot Version
Booting code version.
Kernel Version
The kernel version.
CPE Version
The CPE version.
System Up Time
System up time since the last reboot.

Account Page Definitions

GXV3350 has 16 lines that can be configured to accommodate 16 independent SIP accounts. Each SIP account has an
individual configuration page.

Account/General Settings

Account/SIP Settings

SIP Basic
Settings
SIP
Registratio
Allows the phone system to send SIP REGISTER messages to the proxy/server. The default setting is "Yes".
n
Controls whether to clear SIP user's information by sending un-register request to the proxy server. When
Unregister
set to "All", the un-registration is performed by sending a REGISTER message with "Contact" header set to *
before
and Expires=0 parameters to the SIP server when the phone starts pre-registration after rebooting. If set to
New
"Instance", the phone only cleans the current SIP user's info by sending REGISTER message with "Contact"
Registratio
header set to concerned SIP user's info and Expires=0 parameters to the SIP server. The default setting is
n
"Instance".
Register
Configures the time period (in minutes) in which the phone refreshes its registration with the specified
Expiration
registrar. The default setting is 60. The maximum value is 64800 (about 45 days).
(m)
Subscribe
Specifies the frequency (in minutes) in which the phone refreshes its subscription with the specified registrar.
Expiration
The maximum value is 64800 (about 45 days). Default value is 60.
(m)
Re-register
before
Specifies the time frequency (in seconds) that the phone sends re-registration request before the Register
Expiration
Expiration. The default setting is 0. The range is from 0 to 64,800.
(s)
Registratio
n Retry
Configures the time period (in seconds) in which the phone will retry the registration process in the event
Wait Time
that is failed. The default setting is 20. The maximum value is 3600 (1 hour).
(s)
Table 8: Status/System Info

Advertisement

Table of Contents
loading

Table of Contents