Grandstream Networks GXV3350 Administration Manual page 48

Defines the Layer 3 packet's QoS parameter for RTP messages in decimal pattern. This value is used for IP
Layer 3 QoS Precedence, Diff-Serv or MPLS.
for Audio
The default setting is 46 it is equivalent to the DSCP name constant EF.
Defines the Layer 3 packet's QoS parameters for H.264 messages in decimal pattern. This value is used for
Layer 3 QoS
IP Precedence, Diff-Serv or MPLS.
for Video
The default setting is 34 it is equivalent to the DSCP name constant AF41.
HTTP/HTTPS
Sets the user-agent for phonebook and screen saver.
User-Agent
SIP User-
Sets the user-agent for SIP.
Agent
Configures whether to separate Ethernet & Wi-Fi traffic. If enabled, VoIP calls are forced to use Ethernet,
Separate
and other application data preferentially use Wi-Fi. Note: To make it take effect, please ensure that the
Ethernet &
network environment is configured correctly.
Wi-Fi Traffic
The default setting is No.
Maximum
Configures the MTU in bytes. Please set MTU reasonably according to your needs. Note: If MTU is set to
Transmission
less than 1280, IPv6 may not take effect.
Unit (MTU)
PC Port Mode
Enables and defines the PC port mode. If it is set to "Mirrored", the traffic in the LAN port will go through
PC Port Mode PC port as well and packets can be captured by connecting a PC to the PC port. The default setting is
"Enable".
Defines the VLAN Identifier of the Layer 2 frame for PC port.
This adds the VLAN tag value on the target address received from the LAN port of the phone then sends
PC Port VLAN
the value to the device connected to the PC port.
Tag
Note: VLAN tag value on the device connected to the PC port should be the same as the VLAN tag value
assigned to the PC port here.
PC Port
Determines the Priority Code Point within a Layer 2 frame header for PC port.
Priority Value
Proxy
HTTP/HTTPS
Configures the HTTP/HTTPS proxy URI of the network. Some of networks requires going through a proxy
Proxy
to access to the Internet. The default setting is keeping this field blank.
Hostname
HTTP/HTTPS Configures the HTTP/HTTPS proxy port number of the network. Some of networks requires going through
Proxy Port a proxy to access to the Internet. The default setting is keeping this field blank.
Defines the specific URI that the phone can directly access to without HTTP/HTTPS proxy. If it is filled, the
Bypass Proxy
phone will bypass the proxy to send the packets to the specific URI. The default setting is filed blank.
For
Note: This option allows IP range, for example: 192.168.1.0/24