Network Settings/Openvpn® Settings - Grandstream Networks GXV3350 Administration Manual

Configures the Wi-Fi frequency band from the list:
2.4G
WiFi Band 5G
2.4 G & 5G
Default setting is 2.4G & 5G.
Permits to scan and select the available Wi-Fi networks within the range if the Wi-Fi feature is enabled.
ESSID Click on "Select" to select the Wi-Fi network to connect to. The ESSID will be auto filled in the ESSID
filed.
Add Network
ESSID Configure the hidden ESSID name.
Security Mode
Defines the security mode used for the wireless network when the SSID is hidden. Default is "None".
for Hidden SSID
Password Determines the password for the selected Wi-Fi network.
Advanced
Settings
Configure Wi-Fi country code. The default value is "United States of America".
Country Code
Note: Reboot is required to take effect.
Network Settings/OpenVPN® Settings
Enable OpenVPN®
OpenVPN® Mode
Enable OpenVPN® Comp-lzo
OpenVPN® Server Address
OpenVPN® Port
OpenVPN® Transport
OpenVPN® CA
Table 21: Network Settings/Wi-Fi Settings
This enables/disables OpenVPN® functionality and requires the user to have access to an OpenVPN®
server. The default setting is No. NOTE: To use OpenVPN® functionalities, users must enable
OpenVPN® and configure all the settings related to OpenVPN®, including server address, port,
OpenVPN® CA, certificate and key. Additionally, the user must also set the SIP account to use
"OpenVPN" for the "Nat Traversal" (under Account-> General Settings-> Network Settings).
Simple mode only supports some basic or common parameters configuration; Professional mode
suppports configuration file upload, which is totally customized by need, please refer to
https://openvpn.net for more information.
Enables OpenVPN® LZO compression. When the LZO compression is enabled on the OpenVPN®
server, you must turn on it at the same time. Otherwise, the network will fail to connect.
The URL/IP address for the OpenVPN® server.
The network port for the OpenVPN® server.
By default, it is set to 1194.
Determines network protocol (UDP or TCP) used for OpenVPN®.
Default is UDP.
OpenVPN® CA file (ca.crt) required by the OpenVPN® server for authentication purposes. Press
"Upload" to upload the corresponding file to the device. The file will not be uploaded if it is not in the