System Settings Page Definitions; System Settings/Time And Language - Grandstream Networks GXV3350 Administration Manual

Ip video phone
Hide thumbs Also See for GXV3350:
Table of Contents

Advertisement

Remote
Control
Indicates whether CSTA Control feature is enabled. Change of this configuration will need the system
CSTA Control
reboot to make it take effect.
Action URI
Configures whether the phone is enabled to receive and handle Action URI request.
Support
Remote
Configures whether the phone is enabled to pop up allow remote control window. If set to "Yes", when
Control Pop
the remote console is connected to the phone, the phone will pup up a window to allow remote control
up Window
or not. If set to "No", once the remote console successfully connect s to the phone, it can directly control
Support
the phone remotely.
Action URI
List of allowed IP addresses from which the phone receives the Action URI. If input "any", any remote
Allow IP List
console can access this phone.
Network Settings/SNMP Settings
This page allows to enable/disable the SNMP feature. Default settings is "No". When enabled, the device is an SNMP agent
compiling and storing all the data from its given device into a database (MIB). This database is properly structured to allow
the Manager software to easily poll information and even send information to the Manager if an error has occurred.
Enable SNMP
Configures whether to enable SNMP.
Version
Selects SNMP version from the drop-down list.
Port
Configures the port for SNMP.
Username
Configures username for SNMPv3.
Security Level
Selects security level for SNMPv3.
Trap Version
Selects trap version of SNMP trap receiver.
Trap IP Version
Configures IP address of SNMP trap receiver.
Trap Port
Configures the port of SNMP trap receiver.
Trap Interval(m)
Configures the interval between each trap sent to the trap receiver.
Trap Community
Configures community name associated to the trap. It must match the community name of the trap receiver.

System Settings Page Definitions

System Settings/Time and Language

Table 23: Network Settings/Advanced Network Settings
Table 24: SNMP Settings
Time Settings

Advertisement

Table of Contents
loading

Table of Contents