Grandstream Networks GXV3350 Administration Manual page 29

Ip video phone
Hide thumbs Also See for GXV3350:
Table of Contents

Advertisement

Video Layout
Auto Answer
Custom Alert-Info for Auto Answer
Play Warning Tone for Auto Answer Intercom
Intercom Barging
Auto Preview
● "Accept": Video request will be accepted
automatically, and video will be established.
● "Deny": Video request will be rejected
automatically.
Defines whether to enter full screen when
incoming video call is answered.
● "Fullscreen": GXV3350 will show the
remote video feed in full screen.
● "Only display Remote Screen": GXV3350
only displays the remote screen in full
screen mode.
● "Default": GXV3350 will show both remote
and local video feed.
Sets the phone system to allow to answer an
incoming call automatically when idle. If it is set
to "Yes", the phone will automatically enable the
speaker phone to answer all the incoming calls
after a short reminding beep. If set to "Enable
Intercom/Paging", it will automatically answer
the incoming calls whose SIP INVITE includes
auto-answer tag in the info header. The default
setting is "No".
Configures the Alert-Info content. Only when
the info or the parameter in Alert-Info header
matches this content would the phone answer the
paging call automatically. If set to blank, all
paging calls will be answered automatically.
When this option is enabled, the phone will play
a warning tone When auto-answering intercom.
The default setting is "Yes".
Configures whether to answer the incoming
intercom call when there is already an active call
on the phone. When" Intercom Barging" is
enabled, and if the current active call is an
intercom call, the incoming intercom call will be
automatically rejected; otherwise if the current
active call is not an intercom call, the current
active call will be put on hold and the incoming
intercom will be automatically answered. When
"Intercom Barging" is disabled, a prompt will
show up indicating the incoming intercom call
without interrupting the current active call.
Default setting is disabled.
Configures whether to turn on video to preview
the video of the caller. If set to "Yes", the user
can view the video and hear the caller on the
incoming page when there is an incoming call.
f set to "Yes with Ringing", the caller can view
the video of the caller and hear the ringtone on
the incoming page but cannot hear the caller.
Note: If Auto Answer function has been enabled,
this function does not take effect. Default Value:
"No".

Advertisement

Table of Contents
loading

Table of Contents