Grandstream Networks GXV3350 Administration Manual page 40

Default setting is "Auto".
Configures when there are multiple lines, whether to UnHold the line
automatically when click the line being held and hold the line in the
Auto Unhold When Press
primary call.
the Line Key
Note: the hold situation which is set manually will not be put on hold
automatically. The default setting is "No".
If set to "Yes", when processing SIP Register 3XX Response, it will parse
Virtual Account Group the address site in 3XX, modify the account server info "SIP Server: port"
Avaya Mode & "SIP Transaction" in virtual account group and initiate registration again.
This feature is designed for the Avaya customers.
Number of Accounts The Configures the number of concurrent the main server and standby server
Virtual Account Group register, each account supports 1 SIP main server and 4 standby server
Register registration.
Sets the characters for filter when dial out numbers. Users could set up
multiple characters. For example, if set to "[()-]", when dial (0571)-8800-
Filter Characters
8888, the character "()-" will be automatically filtered and dial
057188008888 directly.
Determines which characters will be included in the SIP INVITE URI if
end users input #. If it is set to "Yes", the phone system will replace the # by
Escape # as %23 in SIP
%23. Otherwise, it will include # in the SIP INVITE message.
URI
The default setting is "Yes".
Configures phone APP for the device. The default setting is Phone of
Grandstream, but if you develops a new phone application using SDK, you
Default Phone APP can choose the new one to replace the original. The configuration of
"Quickly Launch 3rd Party APP" is not available if the default phone
application changes.
Selects the specified application that launch quickly by offhook/clicking the
Dial or Conference. Once selected, the package name and activity of
Quickly Launch Specified specified application will be displayed below. When user offhooks / click
APP the Dial or Conference application, it will automatically enter the
configured application interface. The default setting is blank, which means
using GS phone application.
Configures phone recording mode.
● If set to "Record locally", then the phone will use the local tape
● If set to "Record on PortaOne", then will send the specified SIP
Record Mode
● If set to "Record on UCM", then will send the recording feature code
● If set to "Record on Broadsoft", then will send the recording feature
● If set to "Disable", recording functionality will be disabled during calls.
Configures whether to auto record when a call is established. If set to "Yes",
Enable Auto Record
the call recording will start automatically when the call is established.
When Call Established
Note: If Record Mode is set to "Disabled", it will not be configured.
Specifies whether to enable rejected call notification. Once enabled, a
Rejected Call Notification missed call will prompt on LCD when rejecting an incoming call and the
rejected call will be saved in Call History Missed numbers.
Return Code When When refusing the incoming call, the phone will send the selected type of
Refusing Incoming Call SIP message of the call.
phone will enter into the dial screen, and the media channel will switch
to the handset.
recorder for call recording, and the audio file will be saved in
accordance with the tape recorder setup.
messages to the corresponding server.
to the UCM server to request for recording, and the recording function
will be executed by the server.
code to the Broadsoft server to request for recording, and the recording
function will be executed by the server.