Status Page Definitions; Status/Account Status; Status/Network Status - Grandstream Networks WP820 Administration Manual

Value-added Service: Configure GDS settings.

Status Page Definitions

Status/Account Status

Account Displays list of configured accounts.
Number Displays the numbers of the configured accounts.
SIP
Displays list of SIP Server user by the configured accounts.
Server
Shows the status of SIP registration. If the SIP account is successfully registered, it will display "Registered" with
Status
green background. If the SIP account is not registered, it will display "Unregistered" with grey background.

Status/Network Status

Shows Device ID in hexadecimal format. This is needed by network administrators for troubleshooting. The MAC address
MAC
will be used for provisioning and can be found on the label on original box and on the label located on the bottom panel of the
Address
device.
NAT Type Indicates type of NAT for each Profile. (Based on STUN protocol.)
IPv4
Address
Indicates the configured address type: DHCP or Static IP
Type
IPv4
Displays assigned IP address. Example: 192.168.5.110
Address
Subnet
Displays assigned subnet mask. Example: 255.255.255.0
Mask
Default
Displays assigned default gateway. Example: 192.168.5.1
Gateway
DNS
Shows assigned DNS server address 1. Example: 8.8.8.8
Server 1
DNS
Shows assigned DNS server address 2. Example: 8.8.4.4
Server 2
IPv6
IPv6Addr
Indicates the configured address type: DHCP or Static IP
ess Type
IPv6
Displays assigned IP address.
Address
IPv6 DNS
Shows assigned DNS server address 1.
Server 1
Table 9: Status/Account Status