Grandstream Networks GXV3350 Administration Manual page 72

Set the door system type to "GDS" if the GDS door system is used, or set it to "Baudisch" if another door
Door system brand is used.
System
Note: Each GDS door system has 2 different access passwords to control 2 doors separately named as
Type
[Related Display Name1] & [Related Display Name2] below for door 1 and 2 respectively.
Specifies the door system number which is the SIP user ID configured on door system or its IP address, if the
door system is using IP call. It enables to show open door button when caller number or IP address matches
with this setting. e.g:"36311" or "192.168.124.81".
Note: When set "Door System Type" to "Baudisch" a "configure" button will appear to allow user to configure
groups of door system URL and User ID for 100 entries.
System
System Number: This is used to configure the User ID of door system. Once configured, only the call
Number
from this User ID would use door system while other calls use the default mode.
System Address: This is used to input the IP address or URL of the system in order to identify the call
from door system.
Users can set HTTP authentication credentials on the URL for Door Systems that require authentication to
send HTTP stream. The URL format will be similar to the following:
http://username:password@192.168.1.150/goform/stream?cmd=get&channel=4
Display Configures the display name of the door system. When the call matches the configured system number, the
Name name will be displayed on LCD.
Related
Configures the name that will be displayed on LCD for door 1 when the call matches the configured GDS door
Display
system number.
Name1
Determines the door system password which should match the one configured on the used door system
Access
settings. In case the GDS is set as 'Door System type' parameter, the password should match the one
password
configured on the GDS to open door 1.
Related
Indicates the name that will be displayed on LCD for door 2 when the call matches the configured system
Display
number.
Name2
Access
The configured password should match the one configured on the GDS to open door 2.
password
System Allows users to configure the ringtone for the door System. Users can choose different ringtones from the
Ringtone dropdown list.
DTMF
Set the DTMF content that is going to be sent when the DTMF button is pressed under Call screen��"Keypad".
Content
Value-added Service/General Settings
Display Open Door Configures whether display Open Door button when there is an incoming call. If set to "Yes", you
Button When cannot open door with DTMF when preview function is disabled, the phone will hide open door
Calling button automatically.
Configures whether to enable preview function or not. If set to "No", you can not open door with
Enable Preview
DTMF when there is an incoming call, the phone will hide open door button automatically.
Table 38: Value-added Service
Table 39: Value-added Service/General Settings