Account Page Definitions; Account/General Settings - Grandstream Networks WP820 Administration Manual

Account Page Definitions

Account/General Settings

Account Registration
Account Active This field indicates whether the account is active.
The default setting is "Yes".
Account Name Configure the name associated with each account to be displayed on the LCD.
SIP Server Configures the URL or IP address, and port of the SIP server. This is provided by
your VoIP service provider (ITSP).
Secondary SIP Configures the URL or IP address, and port of the SIP server. This will be used
Server when the primary SIP server fails.
SIP User ID Configures the user account information, provided by your VoIP service provider
(ITSP). It's usually in the form of digits similar to phone number or actually a
phone number.
SIP Authentication Configures the SIP service subscriber's ID used for authentication. It can be
ID identical to or different from the SIP User ID.
SIP Authentication Configures the account password required for the phone to authenticate with the
Password ITSP (SIP) server before the account can be registered. After it is saved, this will
appear as hidden for security purpose.
Display Name Configures the SIP server subscriber's name (optional) that will be used for Caller
ID display.
Tel URI Indicates E.164 number in "From" header by adding "User=Phone" parameter or
using "Tel:" in SIP packets, if the base has an assigned PSTN Number.
Please consult your carrier before changing this parameter. Default is Disabled.
Voice Mail Access Defines the voice mail portal access number to allow users accessing their voice
Number messages.
•
Disabled: Will use "SIP User ID" information in the Request-Line and
"From" header.
•
User=Phone: "User=Phone" parameter will be attached to the
Request-Line and "From" header in the SIP request to indicate the E.164
number. If set to "Enable".
•
Enabled: "Tel:" will be used instead of "sip:" in the SIP request.
WP820 Administration Guide
Version 1.0.1.15
P a g e |
33