Return To Idle Screen; Register A Sip Account - Grandstream Networks WP820 User Manual

Hide thumbs Also See for WP820:

Table of Contents

Return to Idle Screen

Press the Power Key

to quickly exit the menu and return back to the main idle screen.

When you are navigating on the handset's menu, and you receive an incoming call, the LCD screen will automatically exit the

menu and you can either accept or reject the call, when the call is terminated, the LCD screen will return to the idle screen.

The WP820 supports up to 2 SIP accounts and they can be configured either using the web GUI or via the keypad menu as

described on the following section.

1. Access your WP820 base station web UI by entering its IP address in your favorite browser.

2. Enter your admin's username and password (default username and password: admin/admin).

3. Press Login to access your settings.

4. Go to Account tab and select the account to configure.

5. In General Settings, set the following:

Account Active to Yes.

Account Name: Any name to identify this specific user.

SIP Server field with your SIP server IP address or FQDN.

Secondary SIP Server with your secondary SIP server IP address or FQDN. Leave empty if not available.

SIP User ID: User account information, provided by VoIP service provider (ITSP). Usually in the form of digit similar to

phone number or actually a phone number.

SIP Authenticate ID: SIP service subscriber authenticate ID used for authentication. Can be identical to or different

from SIP User ID.

SIP Authentication Password: SIP service subscriber's account password to register to SIP server of ITSP. For security

reasons, the password field will be shown as empty.

Outbound Proxy: configure this field with your outbound proxy IP address or FQDN. Leave empty if not available.

6. Press Save and Apply to save your configuration.

After applying your configuration, your phone will register to your SIP Server. You can verify if your WP820 has registered with

your SIP server from its web interface under Status �� Account Status ("Registered" with green color when the account is

correctly registered, or "Unregistered" with grey when the account is not properly registered)

To register your SIP account via the LCD menu, please refer to following steps:

1. Unlock your WP820 and press Menu to bring up operation menu.

2. Use arrow keys to reach Settings and then select Account tab.

Figure 30: Account Status

Table of Contents