Grandstream Networks GXV3350 Administration Manual page 36

Account/Special Features
Call Settings
This feature is used for BroadSoft / Metaswitch call feature synchronization. When it's set to BroadSoft /
Feature Key
Metaswitch, DND and Call Forward features can be synchronized with BroadSoft / Metaswitch server. The
Synchronizat
call forward function will take effect on the server side while the local call forward function is not effective.
ion
The default setting is "Disable".
Enable
Configures whether to send SUBSRCIRBE message to BroadSoft server to obtain Call Park notifications.
BroadSoft
The default setting is "No".
Call Park
7Conference Configures the network-based conference URI (the BroadSoft Standard). If it is configured, end user needs
URI to tap the N-way key during the conference to transfer the host to the remote media server.
Broadsoft
When enabled, Feature Key Synchronization will be enabled regardless of web settings. Default is Disabled.
Call Center
Hoteling
Enables BroadSoft Hoteling Event feature. Default is Disabled.
Event
Call Center When set to "Yes", the phone will send SUBSCRIBE to the server to obtain call center status. Default is
Status Disabled.
SCA
Enables/disables the Shared Call Appearance (the Broadsoft Standard) feature for this account. If it is set to
"Yes", the phone system can update and share account status with another device. The default setting is
Enable SCA
"No".
(Shared Call
Appearance)
NOTE: The Enable SCA settings now supports provision via strings. The value "0" can be replaced with
"line"or "private"; value "1" can be replaced with "shared" or "sharedline".
Enables/disables the Barge-In feature. If it is set to "Yes", the user could
Enable
Barge-in
tap the SCA account to barge into an active session with another shared line. The default setting is "No".
Auto-filling
If it is set to "Yes", the configured "Call Park Service Code" will be automatically filled in on the phone's dial
CallPark
pad when picking up the parked call. This option will be active only if "Special Mode" is set to "Broadsoft"
Feature
and "Enable SCA" is set to "Yes". The default setting is "Yes".
Code
Configures the pickup feature code for call park. If " Auto-filling CallPark Feature Code " is set to "Yes", this
CallPark
call park service code will be automatically filled in on the phone's dial pad when picking up the parked
Feature
call. This is used when "Special Mode" is set to "BroadSoft" (from web UI or provisioning) and "Enable SCA"
Code
is set to "Yes"
parameters used are the ones configured at [Download Contacts]. The
authentication can be done either using admin credentials (if no SIP account is
configured) or using SIP account credentials.
The default setting is "Yes".
Table 13: Account/Advanced Settings