Grandstream Networks GXV3350 Administration Manual page 56

Complete Upgrade
Upload Firmware File to Update
Upgrade via Network
Firmware Upgrade Mode
Firmware Server Path
HTTP/HTTPS User Name
HTTP/HTTPS Password
Firmware File Prefix
Firmware File Postfix
Firmware Upgrade
Config File: Configure Manually
Download Device Configuration
Upload Device Configuration
Start Provision
Config File: Configure via Network
Use Grandstream GAPS
Config Upgrade Via
If enabled, all files will be replaced except user data. Default is disabled.
Allow users to load the local firmware to the phone to update the firmware.
Allow users to choose the firmware upgrade method: TFTP, HTTP, HTTPS or
Manual Upload. The default setting is "HTTP".
Set the IP address or domain name of firmware server. The URL of the server that
hosts the firmware release. Default is "fm.grandstream.com/gs".
Enter the user name for the firmware HTTP/HTTPS server.
Enter the password for the firmware HTTP/HTTPS server.
Check if the firmware file is with matching prefix before downloading it. This
field enables user to store different versions of firmware files in one directory on
the firmware server.
Check if the firmware file is with matching postfix before downloading it. This
field enables user to store different versions of firmware files in one directory on
the firmware server.
Click the "Update Detect" button to check whether the firmware in the firmware
server has an updated version, if so, update immediately.
Config File
Download the phone's configuration file in text format. The config file includes all
the P value parameters for phone's current settings except password for security
purpose. Users can use the Grandstream configuration file generator to generate
binary config file from this text file.
Uploads configuration file to the phone. The file will not be uploaded if it is not in
the correct format.
Note: The GXV3350 supports only txt format for config file upload.
Press to trigger the device to fetch configuration file from server configured under
the Config server Path. The same button is located on LCD screen under
➔
Settings System Update.
It is used to configure the download path and update mode for the configuration
file server.
● If set to "Yes", the device will set the download path of the configuration file
to "fm.grandstream.com/gs" by default and use HTTPS protocol to connect to
the server.
● If set to "No", then users can manually configure the path and update mode for
the configuration file server.
Select provisioning method: TFTP, HTTP or HTTPS.