Table of Contents
Advertisement
Support Setting:
Roof Density:
Threshold Angle:
Min. Surface Area:
Spacing:
Stable Support:
Other Settings:
Thin Wall:
UP Studio can detect if the wall is too thin to be printable. This option can increase the
wall thickness to be printable.
Preheat:
Before a print starts, preheat the build table for 15 mins.
Easy to Peel:
Increase the gap of the model and the support, so it would be easy to peel off.
Sleep:
After a print job finishes, the printer enters sleep mode, in which an initialization is
needed next time before printing.
Extrusion Width:
The value of the contour print path
The number of layers for the dense support.
The support angle to determine the size of the support structure.
The minimum area to generate the support structure. Smaller areas than this value will
not have support structures.
Determine the density of the support structure. The bigger the value, the lower the
density.
Generate outer contour for support structure for stability.
55
Advertisement
Table of Contents
Need help?
Do you have a question about the UP mini 3 and is the answer not in the manual?