Change Filament During Printing - TierTime UP mini 3 User Manual

Note: Once the print job is stopped, it can not be resumed. You can only start the print from the beginning.

4.7 Change Filament during Printing

Stop Print Job
Resume
Filament
Filament Extrude
Withdraw
1. Click the "Pause" button during an
ongoing print job to pause it
2. Extruder stops moving, and the build
table lowers. Click the "Withdraw" button
to withdraw the filament.
3. Insert the new filament into the inlet
on top of the extruder. Press the
"Extrude" button to load the new
filament.
4. Press the "resume" button and resume
the print job.
18