Resume Printing After Power Outage; Repeat Print Jobs / Print Saved Jobs - TierTime UP mini 3 User Manual

4.8 Resume Printing after Power Outage

If the power was lost during printing, after the power is back, the printer will alert the user whether to resume
the current print job. If you want the print job resume printing, do not move the models on the build table. After
the printer is powered on, do an initialization, and follow the instructions on the touchscreen or UP Studio
software to resume the interrupted print job.

4.9 Repeat Print Jobs / Print Saved Jobs

There are 10 storage slots in the printer. You can choose saved print jobs from those slots from the touchscreen
to start a print job right away, without connecting to a computer.
Save Job Info Start Printing
Back
Storage Slot
19