Printer Initialization - TierTime UP mini 3 User Manual

5 Printer Initialization

5.1 Printer Initialization
After a printer is turned on, a manual initialization is required. In the whole initialization process, the extruder
and the build table will move slowly, and touch the limit switches on the XYZ axis. This is a very important step
for a printer to work properly, because a printer needs to find its zeros. After the initialization process is done,
the options in the software will be lit up and the printer is ready to work.
Two Ways to Start the Initialization Process:
1: After a printer is switched on, or being idle, click the "Initialization" button on the touchscreen.
2: In the UP Studio software, click the "Initialization" button on the navigation menu on the left.
21