TierTime UP mini 3 User Manual page 31

6, Enter filament's "Print Temp", "Platform Temp",
"Filament Diameter", and "Shrink Ratio" on the XYZ
axes.
7, Click the Printer Model, Nozzle Diameter, Layer
Height, and Print Quality, and choose a combination of
values that you want to define detail settings with.
8, For a combination of values of Printer Model, Nozzle
Diameter, Layer Height, and Print Quality, there are
many parameters you can define. To define a setting of a
different combination, you need to repeat step 7 and
step 8.
9, After setting up all the values, click the menu on the
top right corner, and select the "Save", which will save all
the settings in the UP Studio Software.
30