Printer Calibration; Printer Auto Calibration (Touchscreen) - TierTime UP mini 3 User Manual

5.4 Printer Calibration

5.4.1 Printer Auto Calibration (Touchscreen)

1, Click the "Calibrate" button to enter the calibration
page. Make sure the nozzle is away from the build
plate. If they are very close, press the "-" button to
lower the build table.
2, Click the "Auto" button, the extruder will start the 9-
point calibration process,
adjustment.
The whole calibration process is automatic, and it will go for several minutes. Please be patient. Once the process
is finished, click "OK" to confirm. Click the "Back" button to return back to the main Page.
and nozzle height
36