Manual Calibration Of Nozzle Height - TierTime UP mini 3 User Manual

5.4.4 Manual Calibration of Nozzle Height

The nozzle height (the distance between nozzle tip and the print table) is a fundamental setting for a printer. If
the value is set too high or too low, it will cause issues for print jobs. If the following incidents happen, it is
recommended to adjust the nozzle height:
■
The filament can not stick to the build plate.
■ When printing the first layer of the print (raft or model), the nozzle scratches the build plate, giving off noises
or causing the build plate wobble.
Users can choose to either use auto calibration or manual process to adjust the nozzle height.
1, Click the "Calibrate" button to enter the calibration
page. The current nozzle height is the value in the blue
rectangle.
2, Take a look at the 9 values on the right. The red
rectangle showing point 1 has the compensation value
"0.00". Clicking the number "1" will move the nozzle to
the point 1.
41