TierTime UP mini 3 User Manual page 11

3, Hang the filament spool on the filament holder at the back of the machine.
Note: The spool turns counter clockwise. When placing the spool, make sure the filament is tightly coiled around
the spool to avoid any filament tangles.
4, Insert the loose end of the filament into the filament feeding device at the top right at the back of the machine.
When inserting the filament into the entrance of the filament guiding tube, you should feel the filament triggers
the mechanical switch, which is the detector of filament broken device.
5, Continue feeding the filament into the device, until the end of the filament comes out of the other side of the
guiding tube. You may open the top lid to observe.
6, Click the "Filament" button on the touchscreen, and click the filament type button until it turns to the "PLA"
(The button switches to different filament types when you click it)
10