TierTime UP mini 3 User Manual page 32

10, In the UP Studio Software, "Maintenance" then
"Filament Type", and choose "New Filament".
11, You can also export the filament settings to an
".fmd" file using the "Export" option, and import an
"fmd" file through the "Import" option.
Note:
1, Before changing to a different filament, you need to withdraw the filament in the extruder to avoid possible
leftovers inside the nozzle which could cause clogging. Click "Withdraw", and the nozzle will start heating up to the
preset extrusion temperature. Wait until the printer beeps, and then you can slowly pull the filament out from the top
of the extruder.
2, Some filaments for industrial uses are easy to warp, so it is recommended to preheat the print plate before the
actual printing. Choose the intended preheat period, and then click the "Preheat" button on the right.
31