Table of Contents
Advertisement
7, Click the "Extrude" button to start the extrusion process. The nozzle will get heated to the preset temperature
which will be shown on the screen with 100%.
8, The printer will beep when the nozzle temperature reaches the preset value. Press the loose end of the
filament into the filament inlet on the top of the extruder, until the motor inside the extruder grabs the filament
and drags it into the extruder.
9, The filament should be heated inside the extruder. A clean and straight line of melted filament should be
extruded from the tip of the nozzle.
11
Advertisement
Table of Contents
Need help?
Do you have a question about the UP mini 3 and is the answer not in the manual?
Questions and answers