TierTime UP mini 3 User Manual page 55

Dense (support):
Support:
Support Range:
Infill:
Raft:
Surface:
Closing Up Settings:
Surface:
Threshold Angle:
Support Top Layers are with full infill to keep the surface of the model in shape and
smooth.
Support structures lift the model's overhang structure. Normally, they will be removed
after the printing is done.
Support Angle is between the model and the print platform. The setting of the angle
determines the size of the support structure.
The internal structure of the printed model. The density of the infill can be adjusted by
setting.
The supporting structure printed on the build plate to help the model stick.
The top and bottom of the printed model
The number of layers to print for the surface of the model (top and bottom)
The angle of the printing path for model's surface (top and bottom)
54