Rotax MML-912 Maintenance Manual page 123

Step
5
6
7
8
Replacing the coolant
Graphic
Fig. 11
Effectivity: 912 Series
Edition 2 / Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
If the coolant is being replaced with a different type, (conventional coolant,
waterless coolant) the cooling system must be flushed. See chap. 12-20-00
section: 9.3).
Refill newly mixed coolant into the expansion tank (highest point of the cooling
system). See chap. 12-10-00 section: 3.1).
Fit radiator cap.
NOTES: Run the engine briefly and replenish with clean coolant as
required.
Part
1 Attachment screw (stainless steel)
2 Water pump
Procedure
1
2
Function
12-20-00
08533
page 25
October 01/2009