Checking The V-Belt Tension - Rotax MML-912 Maintenance Manual

6) Checking the V-belt tension

See
General note
In the case of configurations with additional auxiliary generator, inspect
attachment and V-belt tension.
To adjust the belt tension:
Belt tension
Step
1
2
3
Checking the V-belt tension
Graphic
2
Fig. 7
Effectivity: 912 Series
Edition 2 / Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Fig. 7.
Loosen the hex. screw (1) M10 and the two M8 allen screw (2) and (3).
Press the alternator upwards and tighten allen screw (3).
Then tighten hex. screw (1) M10 with tightening torque 40 Nm (30 ft.lb) and
allen screw M8 (2) with tightening torque 22 Nm (195 in.lb).
Part
1 Hex. screw M10
2, 3 Allen screw M8
Procedure
1
3
Function
00353
12-20-00
page 17
October 01/2009