Initialize Printer; Italic Printing (Select); Italic Printing (Cancel) - Printronix P7000 H-Series Programmer's Reference Manual

Chapter 3
Configuring The LQ-1600K Emulation With Control Codes

Initialize Printer

ASCII Code ESC @
Hex Code
Dec Code
Purpose
Comment

Italic Printing (Select)

ASCII Code ESC 4
Hex Code
Dec Code
Purpose
Comment

Italic Printing (Cancel)

ASCII Code ESC 5
Hex Code
Dec Code
Purpose
74
1B 40
27 64
Resets all print-related parameters to the power-up
configuration values.
Restores the power-up configuration. The print buffer is cleared
of printable data on the line preceding the command. Current
position is set as top-of-form.
All settings, such as font, international language selection, etc.,
are reset to the power-up default values. Character-by-
character and line-by-line attributes are canceled. All channels
of the vertical format unit are cleared. This command resets the
horizontal tabs to every eighth character column. Interface
parameters and printer protocol selection are not affected.
1B 34
27 52
Turns on italic character printing.
Character graphics (IBM graphic set hex B0 through DF)
cannot be italicized. Italic printing will reduce throughput.
1B 35
27 53
Turns off italic character printing.