Bell; Cancel Character Rotation - Printronix P7000 H-Series Programmer's Reference Manual

Where:
P = activates printable data field variable
p = location of PDF ("A" {above}, "B" {below,default}, "N"
{none})
NOTE: FIM, Postbar, and PDF417 do not support this
parameter.
C = Calculate and plot check digit (if the check digit is optional)
H = activates the height variable
hh = 2-digit barcode height in 1/10"
D = Dark barcode
(Note: This parameter does not take effect under any DBCS
typefaces.)
[;F q data q ] = secondary data field (optional). The secondary
data field is only used to specify the barcode data when the
primary data field is empty (two delimiters without any data).
When the primary data field is not empty, the secondary data
field is ignored.

Bell

ASCII Code BEL
Hex Code 07
Dec Code 07
Purpose Sounds the printer's buzzer/beeper.
Comment The BEL function will sound the buzzer/beeper for 0.2 seconds
upon receipt of this command

Cancel Character Rotation

ASCII Code FS K
Hex Code 1C 4B
Dec Code 28 75
Purpose Cancels character rotation (horizontal printing mode).
Comment This command cancels the effect of FS J. This control code
does not function while in non-DBCS mode.
Bell
51