Set Margin (Right); Set Paper Length (For Hanzi Big5 Printer Only) - Printronix P7000 H-Series Programmer's Reference Manual

Set Margin (Right)

ASCII Code ESC Q n
Hex Code 1B 51 n
27 81 n
Dec Code
Where:
n = 1 through 255; number of columns from the left edge of the
physical page to the end of the print line.
Sets the right margin to n columns at the current character
Purpose
width.
Comment The number of inches of margin does not vary if the font,
character width, or horizontal dot density changes. This
command automatically clears and resets horizontal tabs to
every eight characters, then performs a CAN operation. The
smallest possible space between the left and right margins is
the width of one double-wide 10 cpi character. If a margin
control code violates this minimum distance, it is ignored.
Settings in proportional mode are treated as 10 CPI.
In DBCS mode, the right margin will be set according to the
width of DBCS characters.
This command affects the front panel setting of "Right Margin."

Set Paper Length (For Hanzi Big5 Printer Only)

ASCII Code ASSC 0
Hex Code ASSC 30 54 43
Dec Code ASSC 48 84 67
Purpose To set form length to 1/6 inches.
Where
n1, n2, n3 = 0x30 ~ 0x39
Comment This control code does not function while in non DBCS mode.
T C n1 n2 n3
n1 n2 n3
n1 n2 n3
Set Margin (Right)
105