Set Intercharacter (Two-Byte) Spacing In DBCS Mode
Set Intercharacter (Two-Byte) Spacing In DBCS Mode
ASCII Code FS S n1 n2
Hex Code
1C 53 n1 n2
28 83 n1 n2
Dec Code
Purpose
Defines preceding/succeeding dots for intercharacter spacing.
Comment
This control code defines the space to the left/right of the
printed character in dot positions. The dot size for n1 and n2 is
equal to 180 dpi. The default for n1=0 and n2=3. This control
code does not function while in non-DBCS mode and only for
two-byte characters in DBCS mode.
Set International Character Set
ASCII Code ESC R n
Hex Code
1B 52 n
Dec Code
27 82 n
Purpose
Specifies a language overlay that prints the characters shown
in Table 13 when the specified code is invoked.
Where:
n = hex 0 through E to determine the language overlay shown
in Table 13.
The real Epson only defines character sets through hex C.
101