Chapter
3
Configuring The LQ-1600K Emulation With Control Codes
Skip Over Perforation Cancel
ASCII Code ESC O
Hex Code
Dec Code
Purpose
Comment
Static Barcode Function (For Hanzi Big5 Printer Only)
ASCII Code ASSC 0
Hex Code
Dec Code
Purpose
Comment
108
1B 4F
27 79
Cancels the skip over perforation set by ESC N and resets the
bottom margin to zero.
O is ASCII uppercase o, not zero (0).
T
c
t
ASSC 30 54 63
t
ASSC 48 84 99
t
To set various barcode types:
t = @: Interleaved 2/5
t = A: Code 39
t = B: Interleaved 2/5
t = C: Code 39
t = D: Interleaved 2/5
t = E: Codabar
t = F: EAN-13
t = G: EAN-8
t = H: Codabar
t = I: UPC_A
Where:
•
0: the height of the barcode
n1n2n3 is in ASCII value, the height is 300 dpi, and is
converted to dot by 180 dpi.
•
#: PDF enable/disable
p = 0x30: disable
p = 0x31: enable
•
t = barcode type
•
n1, n2, n3 = 0x30 ~ 0x39
This control code does not function while in non-DBCS mode.
The default barcode height is 1/3 inch.
[;d data d] [;0 n1n2n3]
[;d data d] [;30 n1n2n3] [;23 p]
[;d data d] [;48 n1n2n3] [;35 p]
[;#p]