Define User-Defined Character - Printronix P7000 H-Series Programmer's Reference Manual
Lq-1600k emulation for the p7000 h-series of line matrix printers
Hide thumbs
Also See for P7000 H-Series:
- User manual (402 pages) ,
- Programmer's reference manual (108 pages) ,
- Quick setup manual (90 pages)
Table of Contents
Advertisement
Chapter
3
Configuring The LQ-1600K Emulation With Control Codes
Example
Define User-Defined Character
ASCII Code ASSC 0
Hex Code
Dec Code
Purpose
Comment
58
The following program demonstrates the function of the
command.
2
a1
a2 d1...d144
ASSC 30 32 a1
a2
ASSC 48 50 a1
a2 d1...d144
Sets the ASCII format data for a user-defined character. The
user-defined characters can be printed by sending a1 a2 to the
printer.
Where:
a1 = high byte code point
a2 = low byte code point
d1...d144 = 144 bytes ASCII format data
This command takes effect only in DBCS mode.
d1...d144
Advertisement
Table of Contents
