Dbcs Superscript/Subscript Print (Set/Cancel); Define A Download Character (Dbcs) - Printronix P7000 H-Series Programmer's Reference Manual

Chapter 3
Configuring The LQ-1600K Emulation With Control Codes

DBCS Superscript/Subscript Print (Set/Cancel)

ASCII Code FS r n
Hex Code
Dec Code
Purpose
Comment

Define A Download Character (DBCS)

ASCII Code FS 2 a1 a2 n1...n72
Hex Code
Dec Code
Purpose
56
1C 72 n
28 114 n
Selects superscript/subscript printing in DBCS mode.
Where:
n = NUL (hex 00) or 0 (hex 30) to enable superscript printing
n = SOH (hex 01) or 1 (hex 31) to enable subscript printing
This command is canceled by FS DC2. This control code does
not function while in non-DBCS mode.
1C 32 a1 a2 n1...n72
28 50 a1 a2 n1...n72
Defines a DBCS character for downloading. The control code
should be followed by 72 bytes of data. a1 and a2 together
define the code point of the download character where a1 is the
high byte and a2 is the low byte.
The character can then be printed by sending a1 a2 to the
printer. The character can print in all the DBCS typefaces. It will
be available until the printer power is recycled.
The download ranges are different for different types of
printers:
GB: AAA1~AFFE, F8A1~FEFE, A140~A7A0, FF40~FF7E,
FF80~FFFE
SJIS: High Byte F0~F9, Low Byte 40~FC
BIG5: BIG5 8140~A07E, 81A1~A0FE, C840~C87E,
C8A1~C8FE, FA40~FE7E, FAA1~FEFE,
8100~FE3F, A180~FEAD
CNS AAA1~C1FE, C3A1~C3FE, F321~FE7E
TCA DF30~FC39, DF61~FC7A, DF80~FCFD,
DF41~FC5A
ETEN 8D30~9039, 8D41~905A, 8D61~907A,
8D80~90FD
IMB5550
D240~E87E, D280~E8FC, F940~FB7E,
F980~FBFC
TELETEXT
F7A1~FEFE
WANG DBA0~F4EE, F9A0~FBEE
BIG5+ NIL