Double Wide Print (One Line), Cancel; Double Wide Print (One Line) - Printronix P7000 H-Series Programmer's Reference Manual

Chapter 3
Configuring The LQ-1600K Emulation With Control Codes

Double Wide Print (One Line), Cancel

ASCII Code DC4
Hex Code
Dec Code
Purpose
Comment

Double Wide Print (One Line)

ASCII Code FS SO
Hex Code
Dec Code
Purpose
Comment
NOTE: This control code does not function while in non-DBCS mode.
Double Wide Print (One Line), Cancel
ASCII Code FS DC4
Hex Code
Dec Code
Purpose
Comment
NOTE: This control code does not function while in non-DBCS mode.
62
14
20
Cancels the double wide print for one line only selected by SO,
ESC SO, or FS SO.
This command cancels the double wide print selected by SO,
ESC SO, or FS SO, but does not cancel double wide printing
selected by ESC W or ESC !.
1C 0E
28 14
Selects double wide print for one line only.
This control code is a line-by-line print attribute. When FS SO is
received, the characters on the current line print twice as wide
and then reset automatically.
This control code is cancelled by the DC4 or FS DC4 codes, by
a paper motion control code (LF, VT, etc.), or by CR.
1C 14
28 20
Cancels the double wide print for one line only selected by
FS SO.
This command cancels the double wide print selected by SO,
ESC SO, or FS SO, but does not cancel double wide printing
selected by ESC W or ESC !.