Master Print Select - Printronix P7000 H-Series Programmer's Reference Manual

Master Print Select

ASCII Code ESC ! n
Hex Code 1B 21 n
27 33 n
Dec Code
Purpose Selects or changes print attributes in a single command.
Where:
n = an 8-bit number with the bits set to specify print attributes,
as shown in Table 9. (0 < = n < = 255)
Table 9. Master Print Select Bit Values
Bit No. Bit = 0
0 10 cpi
1 Monospaced
2 Normal
3 Normal
4 Normal
5 Normal
6 Normal
7 Normal
For example, to specify 10 cpi, proportional spacing, and italics,
n = 0 1 0 0 0 0 1 0
Where:
bit 0 = 0 (10 cpi)
bit 1 = 1 (proportional)
bit 2, 3, 4, 5 = 0 (normal)
bit 6 = 1 (italic)
bit 7 = 0 (normal)
n = a binary number (0 1 0 0 0 0 1 0), which equals hex 42.
The hex command sequence is 1B 21 42.
Comment Emphasized is substituted for double strike.
Master Print Select
Bit = 1
12 cpi
Proportional
Condensed
Emphasized
*Double Strike
Double Wide
Italic
Underlined
83