Ipower Configuration For The Global Directory - Polycom GlobalManagementSystem User Manual

iPower Configuration for the Global Directory

In order for an iPower to auto register with the Global Directory, the iPower must be configured to
look up the server. This allows the iPower to access and register with the Global Directory.
From the iPower web page go to:
Highlight the system of interest in the System list and click on Manage System. Go to:
System Info > Admin Tools > Directories >
Directory options > Central and Personal Directories >
Set up Central Directory
Global Management System User's Guide
Field
Server DNS Name
Server IP address:
Port number:
Server Access Account
name:
Account password:
Automatically register this
system's information with the
server:
Description
The server on which the Central Directory
resides.
An alternate way for the system to find the
Central Directory.
3601
The port number that the system assigns
automatically when you select the Polycom
Global Directory as the Server Type. You
cannot modify this number.
The system account name on the Directory
server. You can get this information from
the Directory Server administrator. This
information is not required for systems
configured to use the Polycom Global
Directory.
Lets you enter and confirm the Directory
Server password. You can get this
information from the Directory Server
administrator.
Allows the system to automatically create
or update its own entry in the Directory
Server at startup. This setting is always
enabled for systems configured to use the
Polycom Global Directory.
Chapter 3 Global Directory 60