Video Preferences - Polycom GlobalManagementSystem User Manual

Appendix
iPower Admin Setup Menu
Admin Tools :: Video ::
Video Algorithm
iPower Field
Video algorithm for
ISDN calls
Video algorithm for
LAN calls
Flicker Reduction
iPower Field
Check this to eliminate
video artifacts caused
by using an NTSC
camera and 50 Hz
fluorescent lighting.
Dual Images
iPower Field
Enable (Share
bandwidth between
People and Content)
Allow system to
dynamically adjust
People and Content
bandwidth allocation]
Disable
Global Management System User's Guide

Video Preferences

Type Meaning
Pull down menu This video algorithm determines the encoding
law used on calls over an ISDN network. For
instructions on choosing the algorithm, see
the iPower administrator guide.
Pull down menu This video algorithm determines the encoding law
used on calls over a LAN network. For instructions
on choosing the algorithm, seethe iPower
administrator guide.
Type Meaning
Check box Check or uncheck the box, depending upon the type
of monitor and lighting.
Type Meaning
Radio button Enables the iPower collaboration system to share
bandwidth between People and Content when
Content is being shown. This allows conference
participants to see both People and Content
simultaneously.
Check box Select this option if you want the system to allocate
bandwidth to the video source (People or Content)
that needs it the most at any given time. For
example, if a conference participant is presenting a
slide show, the system provides more bandwidth to
Content when the participant changes a slide.
Radio button Use Disable only when you want to allow more
bandwidth for content images so they can be
transmitted with greater clarity.
Appendix 192