Modifying The System List - Polycom GlobalManagementSystem User Manual

Modifying the System List

The utility buttons on the right hand side of the screen allow you to change the information in the
system list.
Searching for Systems
One way to add a system is to search for units of a certain device type. The search function
allows you to find video endpoints connected to the network but not yet managed by the
program.
1. To search for addresses, click on Search. The search dialog box appears.
2. ViewStation, ViewStation FX and EX, V-Series, ViaVideo and iPower are default to check.
3. Enter the Start and End IP addresses. The End IP field will auto complete the range that
4. Click on OK to start search. All of the systems found on that subnet not yet managed by
5. The results will return with all systems auto-selected. Deselect the systems you do not
Global Management System User's Guide
Search Search for systems on the network which have not
been added to the database. After performing a
search, system can be added from the query results
Add System Allows you to add a system to the database to be
managed by Global Management System
Delete System Removes a system from the database
Edit System Informs Global Management System a system IP
address and password change or enables device
tracing for a system.
If desired, uncheck the device type that does not require search.
you entered in the Start IP field.
Global Management System will be listed.
wish to Manage, then click on Manage Selected Systems.
Chapter 2 System Management 30