Polycom GlobalManagementSystem User Manual page 61

Global Directory Configuration
Configuring your Server to Allow Updates to the Active Directory Schema
1. Open a DOS command prompt.
2. Run command: "regsvr32 c:\winnt\system32\schmmgmt.dll". If successful a window will
3. From the Start Menu:
4. From the console drop down menu: select Add/Remove Snap in. A new window will open
5. In Add/Remove Snap-in window:
6. Click on Add and select "Active Directory schema" from list.
7. Click on Add then click Close.
8. Close "Add/Remove Snap-in" window by clicking on OK.
9. From the console window:
10. In this window:
11. Select Operations Master from the action pull down menu.
12. Change Schema Master window opens up. Make sure that the "Schema may be modified
13. Select OK and close window.
Global Management System User's Guide
appear and state Dll Register Server Succeeded.
Select Run and type the following command line: "mmc /a" and the Microsoft Management
Console window will open up.
up.
Select Active Directory Schema in the left pane within the console
on this Domain Controller" is checked.
Chapter 3 Global Directory 56